HDMI Extender 120M Over Ethernet LAN RJ45 CAT5E CAT6
Introduction
HDMI Over Ethernet is based on TCP/IP standard. It transmit your HD display with the high resolutions up to 395 feet (120 meters) away from your HDMI or DVI-D source by using one CAT5e/6 cable. With the advantage of TCP/IP standard,you can extend your HD video to multiple displays by using an Ethernet Switch.
Panel Descriptions
|
5V/1A |
Supply power for the Sender |
|
RESET |
Hold down the key for 10 seconds, the model will Restore the default setting |
|
AND-OUT |
Connect IR transmitter to this Port. |
|
HDMI - IN |
Connect HDMI Source to this Port. |
|
STATUS |
When system start up, the Green LED will be on,When transmit video, the led will blink. |
|
Power |
Power on, The Red led is on |
|
5V/1A |
Supply power for the Receiver |
|
RESET |
Hold down the key for 10 seconds, the model will Restore the default setting |
|
AND-OUT |
Connect IR receiver to this Port. |
|
HDMI - Out |
Connect HDMI sink device to this Port. |
|
STATUS |
When system start up, the Green LED will be on,When transmit video, the led will blink. |
|
Power |
Power on, The Red led is on |
5.Connection and operation
1) Connect the HDMI source (such as DVD, PS3, STB ) to the HDMI IN of Sender.
2) Connect the IR sender to the Sender IR OUT Port, and Be Directed at HDMI video source's IR receiver.
3) Connect the HDMI out of Receiver to HDTV display.
4) Connect the IR receiver to the Receiver IR IN Port.
5) Use one Cat5e/6 cable up to 120m to connect the Sender and Receiver.
6) Plug two pieces of 5V power supply into the Sender and Receiver.
7) Power on the HDTV display and HDMI source.
